Sanyo Vacuum Cleaner SC X2017 User Guide

INSTRUCTION MANUAL  
Vacuum Cleaner  
SC-X2017  
 
Thank you for your purchase of a  
SANYO Vacuum Cleaner.  
Please read these instructions carefully before using this product  
and keep safe for further reference.  
Table of Contents  
Precautions------------------------------------------------------------------------------1-2  
Introduction of Parts------------------------------------------------------------------2-3  
Use Instructions------------------------------------------------------------------------3-4  
Maintenance-----------------------------------------------------------------------------4-5  
Technical Specification-----------------------------------------------------------------5  
Troubleshooting--------------------------------------------------------------------------6  
Warning:  
1. This vacuum cleaner is intended for household use only.  
2. Any maintenance and repair must be handled by professional  
technician. Please do not try to repair by yourself which may cause  
danger!  
3. The plug must be removed from the power socket before any  
maintenance or replacement.  
 
Precautions  
Do not leave appliance when plugged in. Unplug from outlet when not in  
use.  
Do not use outdoors or on wet surfaces.  
Do not allow to be used as a toy. Children should be supervised to  
ensure that they do not play with the appliance.  
The appliance is not intended for use by persons (including children) with  
reduced physical, sensory or mental capabilities, or lack of experience  
and knowledge, unless they have been given supervision or instruction  
concerning use of the appliance by a person responsible for their safety.  
Use only as described in this manual. Use only supplied attachments.  
Do not use with damage cord or plug. If appliance is not working as it  
should, has been dropped, damaged, left outdoors, or dropped into water,  
it must be repaired by qualified service agent.  
Do not pull or carry by cord, pedal cord, use cord as a handle, close a  
door on cord, or pull cord around sharp edges or corners. Do not run  
appliance over cord. Keep cord away form heated surfaces.  
Do not handle plug or appliance with wet hands.  
Do not put any object into openings. Do not use with any opening  
blocked; keep free of dust, lint, hair, and anything that may reduce air  
flow.  
Keep hair, loose clothing, fingers, and all parts of body away from  
openings and moving parts.  
Do not pick up anything that is burning or smoking, such as cigarettes,  
matches, or hot ashes.  
Do not use without filters in place.  
Turn off all controls before unplugging.  
Use extra care when cleaning stairs.  
Do not use to pick up flammable or combustible liquids such as gasoline  
or use in ashes when they may be present.  
Unplug before connecting any hose attachment accessory.  
1
 
Hold plug when they rewinding onto cord reel. Do not allow plug to whip  
when rewinding.  
Unplug before connecting any hose attachment accessory.  
Avoid using in a vertical position.  
If the supply cord of this appliance is damaged, ask the shop which you  
bought, or it must only be replaced by properly qualified service  
personnel because a special purpose tool is required.  
If you find the motor temperature too high or any unusual noise, should  
be smell or smoke found when using, stop the operation and unplug. Do  
not repair the appliance by yourself.  
Introduction of Parts  
1
2
3
4
5
6
7
8
9
Power cord  
Handle  
On/off switch pedal  
Speed control button  
Cord rewinding pedal  
Upper cover  
Hose socket  
Dust bin  
Dust barrel  
10 Big wheel  
11 Plastic tube  
12 Floor brush  
12  
2
Integrated brush & nozzle  
13  
14 Flexible hose  
13  
 
Accessories: 1 set hose accessory  
1 piece floor brush  
1 set tube  
1 integrated brush nozzle.  
Use Instructions  
1. To connect the hose, press the buttons on the hose end and insert the  
hose into the hose socket until the hose locks. To detach, press the  
buttons and pull the hose toward you. (Figure_1)  
2. Connect the telescopic tube firmly to the handle of hose.  
3. Connect the floor brush or the combination nozzle firmly into the  
telescopic tube.  
4. Before starting operation, pull out the power cord and then insert the  
plug into the power socket which conforms to that on the rating label for  
power supply.  
5. Turn on the machine. Press the on/off button to start. (Figure_2)  
6. The machine would start working without speed control. To control  
suction power, slide the speed control on the body. Suction power can  
also be controlled by sliding the airflow control on the hose. (Figure_3)  
7. Combination nozzle. Use the crevice nozzle to vacuum edges and gaps.  
The head of the combination nozzle can rotate. Use the round brush to  
vacuum sofa, curtain or fragile or easily scratched items.  
8. Turn off the machine: press the on/off switch button again, the machine  
is turned off. Pull the plug out of the power socket. (Figure_2)  
9. Cord reminder. Before rewinding, be sure to the cord is unplugged.  
To rewind the power cord, press the cord rewind button. The cord will be  
drawn in. (Figure_4)  
3
 
10. Moving the machine. Carrying it by using the carry handle. (Figure_5)  
Figure_3  
Figure_4  
Figure_5  
Figure_1  
Figure_2  
Figure_6  
Figure_7  
Figure_8  
Figure_9  
Figure_10  
Maintenance  
Caution:  
Be sure to turn the power off and unplug the unit before cleaning.  
1. Clear the dust:  
1) Take out the dust cup and empty the dust. ( Figure_6)  
2) Clean the dust cup with water if necessary.  
2. Clean Filters:  
1) Rotate the filter and detach from the filter grill. Wash the filter in  
warm water and dry completely before put it back. Be sure to dry  
naturally to prevent deformation. (Figure_7,8,9)  
4
 
2) To clean the motor protection filter, take out the filter and wash in  
water. It can be used after drying completely before put it back and  
be sure to dry naturally to prevent deformation.  
It should be washed at least once a year. (Figure_10)  
If the filter is damaged, replace with new filter.  
Technical Specification  
Input power:  
2000W  
Input voltage:  
Protection class:  
230-240V ~ 50Hz  
II  
Power cord length: 5m  
Dust capacity : 3L  
5
 
Trouble Shooting  
If you have a problem with you cleaner, consult the handy guide below. If the  
cleaner is malfunctioning, do not operate it before asking for service.  
Clean the filter and empty the dust cup.  
Noisy operation  
Low Suction  
Clean or replace the filter.  
Remove the blockage.  
Put the dust cup in place.  
Over-heating/  
Automatically  
Stopping  
Clean the filters, and empty the dust cup. Check for  
blockages and unblock and allow it to cool.  
Plug unit firmly.  
Nozzle is clipped into a compartment at the bottom  
edge on the back of the vacuum cleaner (between  
the wheels).  
Cannot Find the  
Combination  
Nozzle  
It is a single attachment.  
Due to the strong suction power, it may be difficult  
to push, especially thick carpet. Rather than force to  
use the floor brush, lift up the Floor Brush  
momentarily to allow air to flow into the vacuum  
releasing to the built up suction pressure , then do  
well to push floor brush.  
Floor Brush hard  
to push  
Slide and open the suction adjusting plate located  
on the hose handle grip. This will reduce suction  
power of the floor head.  
Cord doesn’t fully  
rewind  
Pull out the cord and rewind again.  
Made in China  
6
 

Quasar CRT Television SP2729 User Guide
Radio Shack VCR 112 16 549 User Guide
Raymarine Two Way Radio Ray215 User Guide
React Video Game Controller RTPS2696o User Guide
Regency Indoor Fireplace L676 1 User Guide
Rival Slow Cooker 3122 CH User Guide
Rockford Fosgate Stereo Amplifier R500 1 User Guide
Rotel Cassette Player RD 2000 User Guide
Samsung Cordless Telephone SPH I325 User Guide
Samsung Microwave Oven M1714 User Guide